Qi2 wireless charger supplier, specified before the order
Six product lines and eleven builds: Qi2 15W, Qi2.2 25W, 3 in 1 stations, car mounts, magnetic power banks, watch chargers and PCBA modules. One desk from the device list to the certificate file.
Six lines, eleven builds
Every line shares the same magnet ring logic and the same certification route. What changes is the device, the housing and the heat path.
15W and Qi2.2 25W builds on a magnet ring, in a stand, a plate or a mount.
15W or 25WMulti device3 in 1 stationsA phone, a watch and an earbuds case on one stand, foldable or fixed.
3 or 4 devicesIn carCar mountsA 15W Qi2 charger on a vent clip or a dash base, with the fitting kit.
Vent or dashAway from a socketMagnetic power banks5000 mAh and 10000 mAh Qi2 packs, with a 7.5W variant on the larger cell.
18.5 or 37 WhWristWatch chargersSingle puck and duo stands, built around the watch family the module serves.
Single or duoOEMPCBA modulesController, coil and shield, specified around your enclosure rather than ours.
Qi2 moduleQi, Qi2 and Qi2.2 in one table
The three profiles buyers mix up, and what each one actually needs.
| Profile | Power | Alignment | What it needs | Likely in 2026 |
|---|---|---|---|---|
| Qi (baseline) | Up to 15W by extension | Free placement | A compatible case and phone | Earbuds, low cost pads |
| Qi2 | 15W | Magnet ring (MPP) | A Qi2 phone and a USB-C supply | Most new phone chargers |
| Qi2.2 | 25W | Magnet ring | A Qi2.2 phone, a supply above 25W, a heat path | Premium chargers and desks |
A charger does not upgrade a phone. It negotiates the highest profile both ends support, which is why the phone list is the first question in any programme.
A certificate you can check
Qi2 and Qi2.2 certification is issued per product model by the Wireless Power Consortium. Every certified product carries a model reference that can be looked up on the WPC product database, and the certificate file names the model, the profile and the power.
That is the difference between a certification and a logo. A page can print a logo; only the database and the certificate file can confirm the model in the carton.
- Ask for the model number, not the product name.
- Search the model on the WPC product database.
- Match the profile: Qi2 15W and Qi2.2 25W are different certificates.
- Ask for the market marks as files: CE, RoHS, FCC, IC-ID, UKCA, KC, PSE.
- Keep the file with the purchase order, dated.
What people actually buy
A starting point from the programmes quoted here. The device list decides the rest.
| Where it is used | Build | Why | What to check |
|---|---|---|---|
| Bedside | Desktop 3 in 1 or duo stand | One socket for a phone and a watch | Rear cable entry, watch cradle |
| Desk at work | 15W Qi2 stand | A phone propped at a readable angle | Case thickness, arm angle |
| Car | Vent or dashboard mount | Charging while driving | Blade fit, heat in sun |
| Travel | Foldable 3 in 1 or 5000 mAh pack | Fits a bag, works in a hotel | Hinge life, packed size |
| Shop shelf | 10000 mAh pack | Capacity per dollar compares well | Delivered charge count, display |
| Own product | Qi2 PCBA module | Charging inside a product | Coil distance, re-test cost |
From brief to first shipment
Six steps. A single model and a full range follow the same sequence.
- 01Device list
The phones, watches or earbuds the product has to serve, and the profile each one supports.
- 02Specification and sample
A build, a housing, an adapter and a specification sheet. The sample is where the case and the angle are decided.
- 03Certification scope
Which profiles and which markets, and who owns the certificate of the finished product.
- 04Tooling and artwork
Housing, packing, manual and the compatibility line on the box.
- 05Pilot run
A first batch tested for heat, drop and charge time before the volume order.
- 06Documents and shipping
Commercial invoice, packing list, certificate files and the label data the market requires.
What is published, what is quoted
A page that answers every number is usually inventing some of them.
| Item | On this site | From us |
|---|---|---|
| Product specifications | Profile, power, capacity, form | Current sheet, revision dated |
| Certification | Profile and how to verify it | Certificate file per model and market |
| Price | Not published | Quoted per build, quantity and destination |
| Minimum order | 1,000 pieces per model on most builds | Confirmed per model, 500 on some |
| Plant size, headcount, capacity | Not published and not claimed | Audit report on request |
Four answers before the email
Is Qi2 the same as MagSafe?
No. Qi2 is the Wireless Power Consortium standard and its magnetic profile aligns with the magnet ring an iPhone 12 or later uses. MagSafe is Apple's own system, and Made for MagSafe is a separate authorisation. This site claims Qi2 and Qi2.2, not Made for MagSafe.
Does a 25W charger charge every phone faster?
No. A 25W build holds 25W with a phone that supports Qi2.2 and falls back to a lower profile with anything else. The phone list decides whether the build is worth its cost.
How do I check the certificate?
Take the model number from the quotation, look it up on the WPC product database, and compare the profile and the power with the box. The certificate file should name the same model.
What is the minimum order?
1,000 pieces per model on most builds, and 500 on a few. Samples are quoted separately, because a sample is a build and a courier, not a unit price.
Start with the phone list, not the brochure.
Send the devices, the volume and the market. The reply is a build, a specification sheet and the certificate list.